| |
|
...Back |
|
| |
 |
Packing |
|
| |
|
| |
|
MOLSIEVE 13X is
packed for industrial use in airtight MS
drums under hot condition with proper sealing
arrangement
so that there is no ingress of moisture during
storage and transportation.
Standard packing : 210 Lit drum size ø 565 x
850(H) mm |
 |
|
|
| |
|
|
|
| |
|
Life |
|
| |
|
MOLSIEVE 13X has infinite shelf life,
when stored in packed condition. The active service life
would depend, however on the operating conditions of the
plant, actual application and the usage by the customer. |
|
| |
|
|
|
| |
|
Loading |
|
| |
|
MOLSIEVE 13X does not require any
special precaution or procedure during loading. However
the health of the grid support is to be checked, and the
vessel is to be cleaned of dust, foreign
particles, etc. before the adsorbent is loaded. During
actual loading, the material should be poured carefully
through funnel and chute as to avoid dusting and
attrition. The drums should not kept in open conditions,
as the adsorbent would adsorb moisture. In case of
prolonged exposure of the adsorbent to moisture during
storage / loading, it may require prolonged regeneration
at higher temperature to restore its full adsorptive
capacity |
|
| |
|
|
|
| |
|
Material Safety
Data |
|
| |
|
The product as such is neither
inflammable, nor toxic. Over all, it is not hazardous.
Repeated exposure may irritate skin, eyes and
respiratory system. The product gets hot as it is first
exposed to atmosphere due to adsorption of
moisture. |
|
| |
|
|
|
| |
|
Regeneration |
|
| |
|
MOLSIEVE 13X should be regenerated
thermally or by evacuation with simultaneous purge. For
thermal regeneration, the adsorbent may be heated to 1100
to 1200
C for removal of CO2 . For simultaneous removal of H2O
and CO2, the adsorbent should be heated to 100-200 C .
However, the exact regeneration condition (temperature,
purge gas flow, etc.) depends on the application, feed
quality and other operating conditions. |
|
| |
|
|
|
| |
|
Application |
|
| |
|
 |
Simultaneous removal of Moisture & CO2
from feed air of Air Separation/ Cryogenic Plant |
|
| |
|
|
Mercaptans removal from
gaseous streams |
|
| |
|
|
Process air drying of dew
point less than (minus) 60 C for sulphonation plant |
|
| |
|
|
Sweetening of Natural Gas |
|
| |
|
|
Removal of H2S from gaseous
streams |
|
| |
|
|
|
| |
|
...Back |
|
| |
|
|
|
