| |
|
...Back |
|
| |
 |
Packing |
|
| |
|
| |
|
Molecular Sieves
GMGB 3A is packed for industrial use in airtight
MS drums under hot conditions with proper
sealing arrangement so that there is no ingress
of moisture during storage an transport.
Standard packing : 200/210 Lit. drum size 565 X
850 (H) mm |
 |
|
|
| |
|
|
|
| |
|
Life |
|
| |
|
MOL.SIEVES 3A has infinite shelf life,
when stores in packed condition. The active service life
would depend, however, on the operating conditions of
the plant, actual application, and the usage by the
customer. |
|
| |
|
|
|
| |
|
Loading |
|
| |
|
MOLSIEVE 4A does not require any special
precaution or procedure during loading. However the
health of the grid support is to be checked, and the
vessel is to be cleaned of dust, foreign
particles, etc. before the adsorbent is loaded. During
actual loading, the material should be poured carefully
through funnel and chute as to avoid dusting and
attrition. The drums should not kept in open conditions,
as the adsorbent would adsorb moisture. In case of
prolonged exposure of the adsorbent to moisture during
storage / loading, it may require prolonged regeneration
at higher temperature to restore its full adsorptive
capacity |
|
| |
|
|
|
| |
|
Material Safety
Data |
|
| |
|
The product as such is neither
inflammable, non toxic. Overall, it is not hazardous.
Repeated exposure may irritate skin, eyes and
respiratory system. The product gets hot as it is first
exposed to atmosphere due to adsorption of moisture. |
|
| |
|
|
|
| |
|
Regeneration |
|
| |
|
MOL SIEVES 3A should be regenerated
thermally or by evacuation with simultaneous purge. For
thermal regeneration, the adsorbent may be heated to 200
- 270 deg.C to remove adsorbed water. The exact
regeneration condition (temperature, purge gas flow,
etc) depends on the application, and other operating
conditions. For better performance over prolonged period
GMGB MOL SIEVES 3A should not be exposed to the temp.
above 400 deg.C and hot gases containing high moisture
should be avoided. |
|
| |
|
|
|
| |
|
Application |
|
| |
|
 |
Cracked Gas and Olefins drying |
|
| |
|
|
Liquid or Gas Propylene
drying |
|
| |
|
|
Drying of Organic Liquids
like methanol, olefins, ethanol (with denaturant
methanol). |
|
| |
|
|
Insulating Glass Manufacture |
|
| |
|
|
Drying of CO2. |
|
| |
|
|
|
| |
|
...Back |
|
| |
|
|
|
